新闻banner

Protective film manufacturers tell you how to use computer radiation protection film

2020-10-29 14:27:35
times

Protective film manufacturers tell you how to use computer radiation protection film


Lifting the computer radiation protection film, we estimate that we have a proper understanding. It is said that desktop computers have less radiation and laptop computers have more radiation. This is an accepted truth. So how do we accurately use the computer radiation protection film?


One: Choose a dust-free room for filming operation. The new machine generally only needs to use the cleaning wipe of the screen protection film set to remove the scattered dust. If the old machine is filmed, you need to clean the clean screen with the cleaning set and dry it first;

    

2: Firstly compare the size of the screen and the film. Generally, the UV stepless dimming power supply protective film will be 2-3 mm smaller than the LCD screen. Align the side with the label 1 on the screen, and lift the label 1. Paste a corner first, proceed from left to right;


Three: The film of label 1 is a protective layer instead of an application layer. Gradually tear off the film of label 1 from below, and use the built-in flannel to continuously smooth the contact surface between the protective film and the LCD screen. Generally, many series of screen protectors are used. The film has electrostatic adsorption function and will actively adhere to the LCD screen;


Four: After the protective film is attached, tear off the film of label 2 above, and the whole process is completed. Assuming that there is an error in the filming process of the Iwata automatic spray gun, the protective film can be re-opened after a few calls and gradually attached. When attaching the second time, pay attention to the occurrence of bubbles. Small bubbles will usually be eliminated within a week;


Under normal circumstances, the time is long. If there is foreign matter or dust on the protective film, you can use a cloth dipped in a suitable cleaning fluid to remove it. But we must be careful to clean, remember not to damage the protective film, it will directly affect the beauty of the computer screen.